Today I downgraded by NAS from 1.06 to 1.05. I got fed up with 1.06’s bugs and non-functionality. Problems included:

1. total admin lockout after 15-20 mins with second hard drive installed (see post below). This only seems to happen if you have 2 drives. With one drive, I never encountered this issue.
2. unresponsive BT web controls. Uploading new torrents to the NAS took over a minute, and clicking any nav item caused a “host disconnected” message, forcing me to re-login.
3. sometimes files get stuck with 16k or less left and the only way to resolve this is to restart. Then the NAS re-checks all your torrents, which can be a very time-consuming process if you have a lot of big downloads started.

Downgrading fixed the first 2 above problems, but now my fan is always on. I am not sure if problem #3 happened in 1.05 or is new to 1.06.

Before updating the firmware, you may wish to remove your drives, or do a backup. I was nervous about this since the last time I installed a new drive, the NAS lied to me and said all my data on the existing drive would not be touched. It went ahead and formated both drives! Needless to say, this caused much unhappiness.

I’ve always had an interest in plants since I could remember. Maybe I owe it to my public school teachers. Every year in elementary school, we got seed catalogs in the spring. We ordered our seeds and a month later, they arrived. One year, we all planted them in cut-open milk cartons and placed our pots on the classroom window sill.

Well, anyway, fast forward 20 years or so and I’m in Japan. I saw a plant growing on the side of a house, along the road, with beautiful, round red and orange fruits resembling cherry tomatoes. They looked so tasty, so I took one and popped it in my mouth. I took a bite and instantly knew something was wrong. It was not sweet and juicy like I expected. I don’t remember what it tasted like, but I knew right away something was wrong. I spat it out immediately and spat a few more times for good measure. Good thing too, because today, I learned the name for them: Jerusalem Cherry (Solanum pseudocapsicum). They are a member of the nightshade family and poisonous!

We have some of these plants around the house. I had forgotten this incident until today. I’ve been learning about different edible weeds and have been sampling a few plants.

What is the point of this whole story? There’s none really… just be careful about what you put in your mouth. A lot of plants look similar, so watch out.

I have a love-hate relationship with my D-Link DNS-323 NAS (network attached storage device). Most of the time, I love it. It just sits there quietly, downloading torrents and generally playing nice with the other computers on my mixed PC/Mac home network. It now even works as a DLNA server after re-installing Twonky Media Server. I can stream movies and music directly off the device to my PS3 and Xbox 360.

Then there’s the times when I really hate it. Like the time it REFORMATTED MY MAIN DRIVE when I installed a second drive even though the screen clearly said all my data on the first drive would remain intact. I lost over 60 GB of data. If you are installing a second drive, make sure you have all the data from the first drive backed up!!

Problem 2: Sometimes, it’ll lock me out of the BitTorrent web management page on random occasions, forcing me to reboot it. I can still access the web configuration page to reset the device, but can’t manage my torrents. When it reboots, all the torrents have to be checked again before resuming, which can take up a lot of time.

Problem 3: With firmware 1.6, a lot of people are also getting complete lockout of the web manager. They can’t even get to the reset page, so they have to do a hard reboot by powering the unit off manually. When trying to access the IP address of the NAS, you get this:

Access Error: Site or Page Not Found
when trying to obtain /web/login.asp
Cannot open URL

You can read more about the problem here. But chances are, if you’re seeing this error and you’ve found my page, you already know what the symptoms are.

I think I’ve isolated the issue. It started happening when I stuck in a second drive. Before that, I don’t remember ever having this issue, even with the 1.5 firmware. I can say for certain that having a second drive in there causes the NAS to go bat-shit. I experienced this several months ago, took out the second drive and was problem-free afterwards. I decided to put the hard drive back in last night and the problem came back.

I do not think it’s related to drive size. I have a 250GB in slot 1 and a 500GB in slot 2.

My friend Mary found this children’s ABC book of people and nationalities, written in 1901 by T. W. H. Crosland. A is for Arab, B is for Boer, C is for Chinaboy… Crosland was probably English, as the letter E is particularly flattering.

As a product of it’s time, it’s funny to see. Most of the letters are benign or even cute, but some are pretty racist by today’s standards. Like J for Japanese (”little Jap”) and K for kaffir. The author probably thought he was being progressive or fair-minded, if grossly inaccurate or stereotypical. He takes many artistic liberties for the sake of a rhyme:

Russia is noted for its tar
its leather, and its great white Czar

Caviar would’ve kept the rhyme with czar and would’ve been factually correct too. Thanks Mr. Crosland, for spreading ignorance to a generation of children.

U is for United States. Americans are portrayed as bustling industrialists and millionaires living in 20-story buildings.

And from a web geek’s perspective, the interface is not user-friendly.

While the page flipping animation is nifty, it quickly wears out its welcome and leads to a bad user experience. There’s no way to bookmark a particular page, or copy the URL to send to a friend. You cannot go to a particular page if you wanted to. If you’re on page 30 and want to go to page 2, you have to click the book 28 times.

These are can crushers outside my neighborhood Key Food, a New York area supermarket chain. You can take your cans and bottles here to get back your 5¢ deposit. Rubberized rollers inside the hole suck the can or bottle in and spin it around for the laser eye to read the UPC code. I tried these today with some old cans in my recycling bin. They’re quite a lot of fun to operate. Any can with a valid CRV (California Redemption Value) gets kicked to the left by a mechanical arm and where it goes CRUNCH. Any can that doesn’t gets kicked to the right and falls back down to the reject bin. Not all cans with CRV’s redeem. The machine rejected Pepsi cans and Monster Energy drink.

In the past, these machines gave out coins as refunds. At some supermarkets, Pathmark in particular, this led to some unpleasant shopping experiences as homeless people congregating around the redemption machines with giant bags full of cans and bottles. Now they print out paper receipts which can only be used towards groceries in the store. A little LCD strip shows you how much you’ve redeemed. Once you’re done, push the little green button and a receipt comes out the slot to the left. Today I got back 50¢ and brought home some bottom round roast and a giant 16 pound Butterball turkey.

In Japan, every governmental organization has a mascot. It’s a national obsession. Most are so bad, all I can do is laugh and shake my head and wonder what they were thinking. In this post, I’ll share with you some of the particularly bad ones (in no particular order). Unintentional comedy follows. Enjoy!

1. Yokohama 150th Anniversary Festival

This mascot is holding his abdomen and looks like he’s about to pee himself. Just look at the expression of effort in his eyes. He’s really holding it in!

Take a few minutes and see if you can guess what he symbolizes. Then highlight the next paragraph for the answer.

Highlight here >>> His name is Tanemaru. He is the mascot for Yokohama’s 150th Anniversary commemorating Admiral Perry’s arrival in the port and subsequent opening up of Japan to the west. “Tane” means seed, and “-maru” is a suffix given to ships. The “pants” of Tanemaru are a boat, so the meaning I’m guessing is the sea-borne arrival of new ideas (the seed of progress, etc). On the official site though, it says: “Tanemaru embodies the spirit of the camphor tree that stands in the courtyard of the Yokohama Archives of History, watching over Japan since the opening of the country 150 years ago.” Admiral Perry’s famous “Black Ships” were.. um… black.. but Tanemaru’s bottom is red, so he must just represent the port and not one of Perry’s boats. On the Japanese website, he is able to fly around like a helicopter with his seed propeller, which is totally unnecessary and destroys the concept of him as a boat, not to mention copying this famous character:<<< END.

..or this one..


“Bon Appetit! my pants are about to fall off.”

2. Nara Prefecture: Sento-kun

This next one is positively creepy and just plain wrong. Nara is famous for 2 things: its native deer population, and the giant Buddha statue at Kamakura (pictured to right). What could be better than combining both aspects into one mascot, right, right?

WRONG!

This unpopular mascot is a fine example of tax yens at work and the poster-boy for design by committee. It reportedly cost 5 million yen ($50,000 USD) and has sparked widespread criticism and even a backlash. Did the government officials not realize that having antlers sprout out of the Buddha might just be seen as just a tad sacrilegious and offend people? It’s like putting a kangaroo pouch on Jesus.

This is just plain scary.

Now there are 2 mascots: this hideous deer-Buddha thing, and one chosen by the people called Manto-kun, which looks like a tater-tot wearing a cape. His name is a pun the word “mantle/manteaux”. His hat is the shape of a temple roof. I guess he’s a deer because he has hooves and antlers.

.. Chopper from One-Piece.

3: Noppon Brothers: Tokyo Tower

Next up is another shitty mascot. Quite literally. They look like rectal suppositories..

.. or worse…

Why do they have to be pink? Tokyo tower is fire-engine red. They have letters on their shirts, just like these 2 other brothers from Canada.

4: Ugly Prefectural logos

Prefectures are like states. Japan has 47 of them, and each one has a logo. The majority of them are as ugly as these breasticles/Fallopian tubes you see below belonging to Kanagawa Prefecture.

For non-Japanese speakers, you can click the links in the green box on the right to see all the prefecture pages.

When I opened my PS3 for repairs, I completely destroyed the rubber plug under the security sticker trying to get it out. At the time, I didn’t realize it was necessary for securing the top cover back in place. Without it, the screw just spins in place and has nothing to grip onto. The hole is too big for the screw. Not finding any information on the web about this problem, I concocted my own solution and am posting it here in case others find it useful.

I won’t duplicate the disassembly guide because it’s been done better by others. There’s a good one here.

Original non-voided sticker and feet

The intact sticker and rubber plug on my white PS3

1. Replacing the Blu-ray drive

On the left is the working drive I bought on eBay; on the right, the dead drive. Replacements are hard to come by and in high demand, so expect to pay around $130-150. I got mine for $140, which is only $25 less than sending my PS3 back to Sony, but because I opened my unit, that was no longer an option. The replacement came without a daughterboard, so I removed the one from my old drive and installed it in the new one. Those of you braver than I am can try replacing just the laser (about $50-70).

..now onto the security cover problem…

2. Torx screw hole

The hole for the Torx screw, which as you can see, is U-shaped so there’s nothing for the screw to grip onto.

3. Tools & Preparation

So what I did was take a plastic screw anchor (the kind used for drywall) and cut it with a wirecutter so it fits inside the screw bay of the PS3 cover (location circled in a previous photo). You can get the wirecutter and screw anchors at any hardware store. If you are lucky and can find an anchor of the same diameter as the Torx screw (circled in red), then you can just screw the cover back on. My anchor was too wide for the Torx screw, so I needed to find a replacement of the same length.

In the photo above, I’ve already cut the anchor. I also cut the screw, but the pieces flew off somewhere and I couldn’t find the head, so I eventually found another screw that fits. For some odd reason, my wirecutter says “Durex”, but I assure you it’s not the condom company. And “screw” in this article does not mean that meaning of screw.

4. Simpler Alternative

Alternatively, if you have a nut and a screw like this, you can just drop it inside the slot and be done with it. Unfortunately, the screw pictured above was too thick to pass through the securement hole of the top cover and also too long. I didn’t feel like rummaging through my toolboxes to find a nut of a smaller diameter so I used the drywall screw anchors.

5. Another angle of the hole.

Drop your cut screw anchor into the location circled here. The anchor should fit perfectly and the holes will be aligned without any fussing around. Slide the PS3 cover back on, screw it back into place, and you’re done!